CRC Graphite Assembly Paste + MoS2

CRC Graphite Assembly Paste + MoS2

A universal assembly spray paste. Special sprayable paste which contains a combination of the extremely pressure-resistant solid lubricants molybdenum disulphide (MoS2 ) and graphite, stabilised in adhesive mineral oil.




  • High load-carrying capacity reducing the appearance of the grooves when inserting components
  • Water-repellent
  • Good corrosion protection
  • Oxidation resistant
  • High thermal stability (up to 650°C)
  • Very good adhesion
  • Prevents seizing
  • Prevents fretting corrosion, scuffing and stick-slip
  • Constant ratio of starting torque to initial tension
  • Smoothes out rough surfaces


  • Mounting of longitudinal press fits, eg. for bolts and bearing seats
  • Assembly of seals and screws
  • Surface treatment of rolling and sliding bearings to improve the running-in and to extend lifetime
  • Lubrication of guides and joints with very slow sliding movement
  • Bearing lubricant for wheel bearings and kiln carts
  • Lubrication of all types of open gears
  • Running-in lubricant of new gear wheels


  • Shake can very well till agitator ball is free
  • Apply a thin, even layer
  • As running-in for rolling and sliding bearings, polish the applied product with a soft cloth. Remove any excess.
  • As running-in for new gear wheels : let the gears operate at a low speed and with a low load (eg. moving by hand) without the operating lubricant.Then fill the system with the lubricant.


  • Temperature range : –30°C to +650°C
  • Load carrying capacity
  • (four-ball welding load) (DIN 51350) : 7.000 N
  • Flash point of aerosol : < 0°C


  • aerosol : 12 x 400ml