Description
General description
Mono component PU foam which expands and hardens with ambient humidity. This foam has a low post expansion and high elasticity. Professional quality, convenient for all common used substrates in constructions.
The aerosol has a remarkable valve system that allows manual application as well as the use of an application gun.
Features
- High degree of elasticity.(till 35% deformatioin)
- Appropriate for sealing, insulating, filling and
- Excellent adhesion to all common construction
- Exercises limited pressure on the supports
- Manual application for the filling of
- The aerosol fits on an application gun for precise dosing
- Excellent thermal and acoustic insulation
Applications
- Filling of all kind of cavities in a building
- Thermal and acoustic insulations
- Fixation of building
- Filling of joints, subject to movement of
Directions
Manual use:
- Shake
- Click/turn the manual dispensing tube with trigger, on the valve: place the wings against the openings on the valve. While pushing slightly, turn a quarter turn. Press short to position the tube well on the
- Humidify the surfaces to be treated
- Hold the can upside down. Place a finger on the trigger on each side of the dispensing tube and activate by pressing the trigger straight down(do not tilt).
- After a firm initial actuation of the aerosol, it is possible to use it in all
Use with the application gun:
- Shake
- Screw the aerosol on the
- Humidify the surfaces to be treated
- Regulate the flow rate with the throttling nut on the
- After removal of an empty aerosol, clean the gun with CRC PU Foam
Note: Clean spoilage of non cured product immediately with CRC PU Foam Cleaner. Cured product only allows mechanical removal.
A safety data sheet (MSDS) according to EU directive 91/155/EEC and amendments is available for all CRC products.
Typical product data (without propellant)
Color : white
Fire reaction class : B3 DIN 4102-1
Ambient application temperature : -3°C to +35°C
Maximal gap filling : manual: 90%
with application gun: 80%
Drying time : to touch 10 min FEICA TM 1014
to be cut 45 min to 60 min FEICA TM 1005
full curing : 24 jours
Expanded volume : a 750 ml aerosol produces FEICA TM 1003
32 liters when applied manual 40 liters when applied with a gun
Thermal conductivity : 0,036 W/m.K EN 12667
Tensile strength : applied manual : 70 kPa ISO 527 applied by gun : 65 kPa
Elongation at break : applied manual : 45 % ISO 527 applied by gun : 50 %
Maximum deformation : applied manual : 30 % applied by gun : 35 %
Temperature resistance : permanent -40°C to +90°C temporarily -40°C to 130°C
Conservation and storage : At a temperature between 5°C and 25°C Straight up, 12 months in the original closed packaging in a fresh and dry environment.
Packaging
Aerosol 12×500 ML
All statements in this publication are based on service experience and/or laboratory testing. Because of the wide variety of equipment and conditions and the unpredictable human factors involved, we recommend that our products be tested on-the-job prior to use. All information is given in good faith but without warranty neither expressed nor implied. This Technical Data Sheet may already have been revised at this moment for reason such as legislation, availability of components and newly acquired experiences. The latest and only valid version of this Technical Data Sheet will be sent to you upon simple request or can be found on our website: www.crcind.com. We recommend you to register on this website for this product so you will be able to receive any future updated version automatically.
