Long-lasting synthetic lubricant for ejection batteries and injection press tools..
Exceptional lubricating power, even under extreme conditions : high temperatures, high
pressures, high linear speeds, friction of steel/steel, steel/bronze, steel/aluminium, etc.
NSF registration : H1 (registration number: 158477)
Eliminates : seizing problems of ejectors or drawers
creeping of greasy products
contamination on the aesthetic side of moulded parts
No deposits : the product does not decompose
Lubrication of taps, valves & fittings and precision mechanisms.
• Do not mix with other lubricants.
• Apply on a clean and dry surface.
• Shake the Aerosol during 1 min.
• Apply sparingly on the parts to be lubricated.
A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and
amendments is available for all CRC products.
Typical product data (without propellant)
|Density at 20°C||0,83|
|Insoluble in water|
|Temperature range||-25°C at +250°C|
Aerosol 12×500 ML
All statements in this publication are based on service experience and/or laboratory testing. Because of
the wide variety of equipment and conditions and the unpredictable human factors involved, we
recommend that our products be tested on-the-job prior to use. All information is given in good faith
but without warranty neither expressed nor implied.
This Technical Data Sheet may already have been revised at this moment for reason such as legislation,
availability of components and newly acquired experiences. The latest and only valid version of this
Technical Data Sheet will be sent to you upon simple request or can be found on our website:
We recommend you to register on this website for this product so you will be able to receive any future
updated version automatically.