CRC NF Precision Cleaner (Non Flammable)

CRC NF Precision Cleaner (Non Flammable)

A unique non-flammable precision cleaner for electrical- and electronic equipment. Chlorinated hydrocarbons (1,1,1-trichloroethane), chlorofluorocarbons (CFC’s) and hydrochlorofluorocarbons (HCFC’s) are extremely effective solvents, and replacing them is not a matter of simply “plugging-in” another solvent.



Product Description

Application trade-offs may need to be made and it is important that factors as :

  • evaporation rate

  • residue

  • flammability

  • flashpoint

  • compatibility to plasticsĀ be seriously considered.

CRC N.F. PRECISION CLEANER is the first alternative on the market that meets the highest performance characteristics :

  • chlorinated hydrocarbon free

  • CFC and HCFC free

  • solvent based

  • non-flammable

  • fast evaporation rate.



  • A high purity, effective, precision cleaner to meet today’s environmental and safety laws

  • Composed of fast drying hydrofluorocarbons (HFC’s) with high cleaning power

  • No ozone-depleting action (ODP = 0,00)

  • Improves the performance and reliability of electronic equipment by cleaning contacts and components quickly and effectively

  • Removes flux traces, light oils, finger prints and other contaminants from electrical/electronic equipment

  • Reduces contact resistance, arcing and wear, and thereby extending the life of sensitive equipment.

  • Non-conductive and non-corrosive; it evaporates completely, leaving no residue

  • Safe on commonly used metals, elastomers, plastics and coatings

  • Equipped with the 360Ā° (upside-down) spray valve for added convenience

  • Low VOC -content : <10%

  • High dielectric strength

  • Specifications : – Douglas Aircraft Company CSD#1

    – Boeing D6 – 17487, Revision L


  • CRC N. F. PRECISION CLEANER is suitable for cleaning and degreasing all types of electrical and electronic components where a shutdown is either impossible or very expensive

  • Relays; switches; circuit breakers; alarm and signal systems; printed circuit boards; connectors; generators, contacts; laboratory- and test equipment; terminals; plugs and jacks; electromechanical assemblies; motor controls; sensors.


  • Spray liberally on surface to be cleaned and allow to run off. Use extension tube for precision application.

  • To remove oxide and carbon deposits, use an abrasive and rinse off intermittently with CRC N. F. PRECISION CLEANER. Re-lubricate with CRC 2-26 if necessary.

  • It is not necessary to switch off electronic/electrical equipment during cleaning. However, it is recommended, while risk of electrical shock can occur when spraycan itself makes accidental electrical contact.



General description : Precision cleaner for electronic equipment

Flammability : No flame extension FEA 607-E

Passes drum test FEA X610-E

Plastics compatibility :

– Bellcore test results :

Noryl : pass

ABS : pass

Lexan : pass

– KB value : <30

Cleaning Power : Cleans 80% of an artificial soil based on LP-100

(CFC113 = 90%)

Evaporation : Evaporation rate 3,5 (ether = 1)

Dielectric strength : 27,3 kV (ASTM D – 877 – 87)

Density of active ingredient : 1,413

Appearance : Clear colourless liquid


aerosol : 12 x 300 ml