Crc Metal Free Paste Anti Seize Compound

Crc Metal Free Paste Anti Seize Compound

Multi-purpose high temperature ceramic separating and mounting paste. CRC Metal Free Paste is a white, metal-free paste, based on high-tech ceramic solid lubricants and matured additives suspended in a mineral/synthetic premium grade stable oil. It is an effective anti-seize formulation for applications from -40°C up to +1.400°C, preventing metal-to-metal contact, seizing, galling and fretting corrosion.




  • Contains no free metals

  • Reduces friction and wear, even when the base oil has already evaporated

  • High pressure and high temperature resistance

  • Protects against burning-in, corrosion and seizing

  • No galvanic corrosion potential

  • Fast and easy mounting of threaded parts

  • Facilitates disassembly of all parts exposed to high temperatures, even after prolonged use in corrosive atmospheres

  • Stops and prevents disc brake noise and vibration

  • Hot and cold water resistant

  • Free from lead, copper, nickel, and their compounds

  • Aerosol formulation does not contain chlorinated solvents and uses LPG propellant


  • Machines

  • Flanges

  • Disc brakes

  • Cylinder heads

  • Threaded parts

  • Exhaust screw connections

  • Heat exchangers

  • Turbines

  • Fittings

  • Bolts, nuts, screws

  • Plugs, shafts, bushings, splines

  • Pipe joints


  • The surfaces to be treated should be clean, dry and grease-free. Wire-brush scaled parts and clean with an oil-free solvent like CRC Industrial Degreaser.

  • A thin, even film should be applied either by spraying or by brushing.

  • Assembled parts can slowly be put in motion.

  • Avoid mixing with other products.

Test before use on plastics and rubber.

  • Do not use on energised equipment, oxygen systems or in presence of acetylene.

  • Use aerosol only in ventilated areas.

  • A safety data sheet (MSDS) according EU-directive 93/112 is available for all CRC products.

TYPICAL(*) PRODUCT DATA (without propellant)

Appearance : homogeneous, white paste

Aerosol properties

Flash point (open cup) : < 0°C

Boiling range (solvent) : 40 – 65°C

Vapour density (vs. air = 1) : 3

Specific gravity (@ 20°C) : 0,88

Dry film properties

Specific gravity (@ 20°C) : 1,4

Flash point (open cup) : > 200°C

Dropping point : none

Penetration (ISO 2137) : 200 – 220

Low temperature stability : -40°C

Temperature resistance

– lubrication : 300°C

– anti-seize : 1400°C**

Hot water resistance (DIN 51807 T1, 40°C, 90°C) : 1

Corrosion (DIN 50021) : > 500h

Four Ball Wear (DIN 51350, 4) : 3800/4000 N


aerosol : 12 x 300 ml

tubes : 6 x 100 g