Long lasting lubricant for use on rollers, chains, conveyer belts in processing equipment. Highly
resistant to water wash off. The gentle foam assures an excellent penetration and a non dripping action.
Good load carrying capabilities and corrosion prevention. Operating temperature from -15°C to
- Wide temperature range
- Provides long lasting lubrication.
- High flash point for application safety.
- Protects against corrosion
- Contains PTFE
- Handling equipment.
- Open drive mechanisms.
- Guide rails.
- Shake well before use.
- Do not mix with other products.
- Do not use on energized equipment.
- Apply to a clean, dry surface.
- Spray a thin and even film.
- To remove residues or excess product, use one of the CRC cleaners
Typical product data (without propellant)
|Operating temperature||°C||-15 to +175|
|Viscosity active product||mPa.s @ 25°C||425|
|4-ball wear active|
|Shelf life||years from production date||6|
Aerosol : 12 x 500 ml
All statements in this publication are based on service experience and/or laboratory testing. Because of the wide variety of equipment and conditions and the unpredictable human factors involved, we recommend that our products be tested on-the-job prior to use. All information is given in good faith but without warranty neither expressed nor implied.
This Technical Data Sheet may already have been revised at this moment for reason such as legislation, availability of components and newly acquired experiences. The latest and only valid version of this Technical Data Sheet will be sent to you upon simple request or can be found on our website: www.crcind.com. We recommend you to register on this website for this product so you will be able to receive any future updated version automatically.