Description
General description
Solvent based cleaner for cleaning ink spoilage, adhesive remnant , PU foam and paints.
Features
• None chlorinated solvents.
• Does not contain silicones.
• Non corrosive.
• Safe on all metal surfaces, does not stain.
Applications
• Removing paint, ink, adhesives and PU from virtualy any hard surface like metal, concrete, wood, stone. Do not
use on plastics and rubbers
Directions
• Spray liberally and allow to run off.
• Wiping with a clean lint free cloth.
• Use only with adequate ventilation.
• Test before use on sensitive materials.
• Do not use on energized equipment.
• Allow to dry at room temperature.
• Repeat if necessary.
• A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available
for all CRC products.
Typical product data (without propellant)
Appearance Liquid.
Color Colorless.
Odor Characteristic odor.
Density 0.79 g/cm3 (@ 20°C).
Flash Point -18 °C
Packaging
Aerosol 12×500 ML Ref. : 32056All
statements in this publication are based on service experience and/or laboratory testing. Because of the wide variety of equipment, conditions of use and the unpredictable human factors involved, we recommend that our products are tested on-the-job prior to use. All information is given in good faith but without warranty neither expressed nor implied. This Technical Data Sheet may already have been revised as a result of a change in legislation, availability of components or newly acquired experiences.
