Industrial Degreaser

Solvent cleaner for heavy contaminants on mechanical parts.

Powerful, fast evaporating cleaner with a flash point of 25°C. Removes greases, oil, lubricants, non-cured adhesives and dirt from equipment, machines and metal parts.When applying to large surfaces or in dip baths, ensure explosion prevention. Test on plastics before use.

Description

General description

Heavy duty cleaner and degreaser for mechanical equipment. Degreases and removes oil, grease, wax, dirt and other contaminants which cause failures. Fast drying for rapid turnaround and to minimise equipment downtime. Leaves no residue.

 

Features

• Attacks encrusted residues.Quickly penetrates and cuts through dirt.
• Does not leave a residue.
• Non corrosive.
• Fast evaporation to minimize downtime.
• Safe on all metal surfaces, does not stain.
• Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use.
• Convenient 360° (including inverted position) spray valve for aerosols.
• High purity CO2 propellant, giving an active product content of 95%

 

Applications

  • Cleaning mechanical parts.
  • Pneumatic tools.
  • Handling equipment.
  • Open drive mechanisms.
  • Wire ropes.
  • Chains.
  • Bearings.
  • Compressor

 

Directions

• Spray liberally and allow to run off.
• Use extension tube for more precise application.
• Use only with adequate ventilation.
• Test before use on sensitive materials.
• Do not use on sensitive electronic equipment.
• Do not use on energized equipment.
• Allow to dry completely before reactivation.
• Allow to dry at room temperature.
• Repeat if necessary.
• Protect and re-lubricate if necessary.
• A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available
for all CRC products.

 

Typical product data (without propellant)

  Aerosol Bulk
NSF registration 111201 cat. A8, K1 132248 cat. A8, K1
Appearance Liquid. Liquid.
Color Colorless. Colorless.
Odor Sweet ether-like. Sweet ether-like.
Density 0.81 g/cm3 (@ 20°C). 0.81 g/cm3 (@ 20°C).
Vapor density 4 (@ 20°C). 4 (@ 20°C).
Flash Point 25 °C (Closed Cup) 25 °C (Closed Cup)
Auto Ignition temperature > 200 °C > 200 °C
Evaporation rate 19 (Ether=1) 19 (Ether=1)
Viscosity 0.76 mPa.s (@ 20°C). 0.76 mPa.s (@ 20°C).
Surface tension active product 23 mN/m 23 mN/m
Kauri Butanol value active product >150 > 150

 

Packaging

Aerosol                                                          12×500 ML                                          Ref. : 10321
Bulk                                                                20 L                                                     Ref. : 10326
                                                                       200 L                                                   Ref. : 30452
                                                                       2×5 L                                                   Ref. : 10325

All statements in this publication are based on service experience and/or laboratory testing. Because of the wide variety of equipment,
conditions of use and the unpredictable human factors involved, we recommend that our products are tested on-the-job prior to use. All
information is given in good faith but without warranty neither expressed nor implied. This Technical Data Sheet may already have been
revised as a result of a change in legislation, availability of components or newly acquired experiences.