Description
General description
Mono component PU foam which expands and hardens with ambient humidity. Professional quality, Specially convenient for static joints in building constructions which have to resist fire up till 2 hours.
The aerosol has a remarkable valve system that allows manual application as well as the use of an application gun.
Features
- Appropriate for sealing, insulating, filling and
- Excellent adhesion to all common construction
- Conform to the new European standards EN 1366-4 end the arrest of 22 March 2004 from the French Ministry of Internal
- Class certified according report N° 12-A-663 from Efectis according standard EN 13601-2. (see test report, available on simple request).
- Resist fire up to 2
- Seals smoke and
- Manual application for the filling of
- The aerosol fits on an application gun for precise dosing
Applications
Filling of all kind of cavities in a building construction. Vertical joints wall/wall.
Joints between pre-fabricated concrete structures.
Directions
Manual use:
- Shake
- Click/turn the manual dispensing tube with trigger, on the
- Humidify the surfaces to be treated
- Hold the can upside down. Place a finger on the trigger, on each side of the dispensing tube and activate by pressing the trigger straight down on the can (do not tilt)
After a firm initial actuation of the aerosol, it is possible to use it in all
Use with the application gun:
- Shake
- Screw the aerosol on the
- Humidify the surfaces to be treated
- Regulate the flow rate with the throttling nut on the
- After removal of an empty aerosol, clean the gun with CRC PU Foam
Note: Clean spoilage of non cured product immediately with CRC PU Foam Cleaner. Cured product only allows mechanical removal.
A safety data sheet (MSDS) according to EU directive 91/155/EEC and amendments is available for all CRC products.
Typical product data (without propellant)
Color : grey
Fire reaction class : EN 1666-4 DIN 4102-1
Application temperature : +5°C to +35°C
Maximal gap filling : manual 50%
with application gun 80%
Drying time : to touch 10 min FEICA TM 1014 to be cut 60 min FEICA TM 1005 full curing 24 hours
Expanded volume : a 750 ml aerosol produces FEICA TM 1003 42 liters when applied manual
45 liters when applied with a gun
Thermal conductivity : 0,036 W/m.K EN 12667
Tensile strength : applied manual : 100 kPa ISO 527 applied by gun : 81 kPa
Temperature resistance : permanent -40°C to +90°C temporarily -40°C to 130°C
Conservation and storage : At a temperature between 5°C and 25°C Straight up, 12 months in the original closed packaging in a fresh and dry environment.
Packaging
Aerosol 12×750 ML
All statements in this publication are based on service experience and/or laboratory testing. Because of the wide variety of equipment and conditions and the unpredictable human factors involved, we recommend that our products be tested on-the-job prior to use. All information is given in good faith but without warranty neither expressed nor implied. This Technical Data Sheet may already have been revised at this moment for reason such as legislation, availability of components and newly acquired experiences. The latest and only valid version of this Technical Data Sheet will be sent to you upon simple request or can be found on our website: www.crcind.com. We recommend you to register on this website for this product so you will be able to receive any future updated version automatically.
