ACRYLIC HITEMP PAINT

CRC Acrylic Hitemp Paint protects metal from high temperatures up to 800° C, which makes it ideal for painting engines, pipelines, heat shields, ovens, pipes,…

It can be used on metal, cast iron and aluminium. For full temperature-resistance, the coating should be gradually heated up to 160°C to 200°C and stay at that temperature for +/- 30 minutes.

• Fast-drying: dust-dry after +/- 10 minutes

• Resistant to very high heat (up to 800°C)

• Very good coverage and filling properties

• Scratch-proof

• Weather-resistant

• For indoor and outdoor use

Categories: ,

Description

General description 

Fast-drying spray paint, resistant to high temperatures (up to 800°C). Very good filling properties and excellent adhesion. Ideal for painting objects that are exposed to high heat. Also suitable as a protective lacquer for engines. Very weather resistant and scratch proof.

Can be used on following surfaces:

  • Metal
  • Cast iron
  • Aluminium

 

Features 

  • Fast-drying: dust-dry in 10 minutes (at 20°C, 50% relative air humidity)
  • Resistant to high heat: up to 800°C
  • Excellent adhesion
  • Very good covering and filling properties
  • Scratch-proof
  • Weather-resistant

 

Applications 

CRC Acrylic High Temperature Paint is recommended as a protective spray paint that can withstand

temperatures up to 800°C. Ideal for painting and protection of pipelines, heat shields, ovens, pipes,…

 

Directions

  • The surface must be clean, dry and free of rust, dust and
  • Thoroughly sandblast: the surface has to be blank to the bare metal. (Do not use a primer)
  • Before use, shake well until the agitator ball moves freely in the can (for 2 to 3 minutes).
  • Spray in 2 minute intervals several thin coats. Spray from a distance of +/- 25 cm. Important: the thinner the paint coat, the better the temperature-resistance and adhesion will be.
  • When finished, clean the aerosol valve by turning the can upside down and press the button until only propellant
  • For full temperature-resistance: gradually heat the coating to 160°C to 200°C and let the paint harden at that temperature for +/- 30 minutes. Formation of smoke and an unpleasant odour can be noticed. Make sure that there is sufficient
  • A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available for all CRC

 

Typical product data (without propellant)

Basis of the binder:                                                                         Silicone resin

Colour:                                                                                             Various

Size:                                                                                                 400 ml aerosol

Gloss level:                                                                                       3 to 5 gloss units (matt)

Consumption:                                                                                   400 ml are sufficient for +/- 1 – 1.2 m2 (depending on consistence and colour of the ground)

Drying time (at 20°C, 50% relative air humidity):                             Dust-dry: +/- 10 minutes

Dry to touch: +/- 60 minutes

Can be exposed to temperature: +/- 1 hour

Temperature-resistant:                                                                     Up to 800°C

Related products